1. The weather resistance test of the tile surface is to simulate the sudden heavy rain after the high temperature sun in summer and the repeated effects of the temperature in winter and summer. The accelerated climate aging test of the roof tile surface is the most important test item for testing and evaluating the quality of the roof tile system. The weather resistance test has a good correlation with the actual project and can well reflect the actual weather resistance performance. The large-scale weather resistance test requires that the sample shall not have hollowing, falling off and cracking after 20 cycles of high temperature (70℃)-rainfall (15℃) and 20 cycles of heating (50℃)-freezing (-20℃).
2. High frequency: For a manufacturer that focuses on technology and testing, the development of each product, each adjustment of the formula, and the replacement of each raw material should not only be strictly quantitatively tested and analyzed for single indicators, but also be tested for qualitative construction performance and comprehensive performance of the physical product.
3. High timeliness: The mall is like a battlefield. In order to meet the needs of the market, enterprises often have high requirements for the timeliness of the test. However, due to institutional reasons, the services provided by most testing agencies are often difficult to meet the testing requirements of the enterprise.
4. Simulation of sunlight: The common aging test method in China is xenon arc radiation, but in foreign countries, xenon arc radiation and ultraviolet aging tests are widely used test methods. These two methods are based on completely different principles. The xenon lamp irradiation test chamber imitates the entire solar spectrum, including ultraviolet light, visible light and infrared light, and its purpose is to simulate sunlight. The ultraviolet aging test does not attempt to imitate sunlight, but only imitates the destructive effect of sunlight. It is based on the principle that durable materials exposed outdoors for a long time suffer the greatest aging damage caused by short-wave ultraviolet light.
After comprehensive cost-effectiveness analysis: Use ultraviolet light + ordinary baking lamp to simulate the direct sunlight state to ensure that both sunlight damage and temperature damage are close to the actual situation.
5. Temperature simulation: According to the requirements of the industry standard, the temperature control range of the weather resistance laboratory should reach -25℃~30℃. However, due to the high cost of refrigeration equipment and the temperature range of the cold winter and hot summer areas, the simulation is temporarily carried out at 0℃~70℃. The method is as follows:
1: 0℃~10℃ range: ice cubes are mainly used to cool the laboratory, and ice-water mixture is used to spray and cool the experimental tiles.
2: 10℃~50℃ range: the temperature control box is mainly used to adjust the temperature of the laboratory, and its adjustable range is from room temperature to 50℃, and auxiliary electric heating means are used to heat the laboratory.
3: 50℃~70℃ range: the sunshine time in summer is long and the solar radiation intensity is high. Usually, the comprehensive air temperature on the outer surface of the horizontal roof reaches 60~70℃, the comprehensive temperature of the west wall reaches 50~60℃, and the comprehensive temperature of the east wall reaches 45~50℃. According to this requirement, we used 5-10 groups of drying lamps and 2 groups of ultraviolet lamps to simulate direct sunlight for baking, ensuring that the surface temperature of the experimental wall reaches the ideal temperature and sufficient exposure time.
6. Note: The above test method does not mean that the product can meet such requirements, but the colored stone metal tiles produced by the colored stone metal tile adhesive can be tested with other similar products to distinguish the advantages and disadvantages. The parameters of the tile adhesive refer to "Development of polyacrylate emulsion adhesive for colored stone metal tiles"
Colored stone metal tile solution suggestion
Aug 04, 2024
Send Inquiry
Categories
Contact Us
Tel: +86 18954317792, +1 732 924 0060
Wechat: 18954317792
WhatsApp: +1 732 924 0060
- Email: hf-supplychain@aliyun.com
- Add: 2712, Block B, Zhongnan Jinshi International Plaza, Huangdao Free Trade Zone, Qingdao, Shandong, China






